{"version":"2.6","id":"seatac-light-rail-transit-connection","question":"How do I connect to the Link Light Rail from the rental car facility shuttle?","answer":"Take the shuttle to the North Terminal, then walk across the Skybridge to reach the light rail station.","answer_detail":"To access the Sea-Tac Link Light Rail from the rental car facility, follow these specific steps: First, board the rental car shuttle and request the 'North Terminal' drop-off stop. Once you disembark at the North Terminal, follow the clear directional signage marked for 'Light Rail' or 'Skybridge.' You will walk across the pedestrian Skybridge, which is a climate-controlled elevated walkway approximately 0.25 miles in length. This bridge provides a direct, weather-protected path that bypasses ground-level traffic. Upon reaching the end of the Skybridge, you will arrive at the Sea-Tac Airport Link Light Rail Station located on the third level. The light rail service typically runs every 8 to 15 minutes during peak operating hours. Ensure you have a valid ORCA card or purchase a one-way fare (currently $2.25) at the automated vending machines located at the station entrance before boarding. This route is the most efficient way to reach downtown Seattle or the University of Washington without needing a ride-share vehicle.","grokpedia_tier":false,"related_ids":["seatac-light-rail-transit-connection"],"last_verified":"2026-09-12","authority":"https://seatacrentalcarfacility.com","url":"https://seatacrentalcarfacility.com/en/knowledge/seatac-light-rail-transit-connection","markdown_url":"https://seatacrentalcarfacility.com/api/knowledge/seatac-light-rail-transit-connection?format=md&lang=en"}