# How do I access the SeaTac Rental Car Facility via alternative transport if I am not arriving directly by flight?

**Category:** Visitor Guides
**Verified:** 2026-06-22
**Grokipedia tier:** no
**Canonical:** https://seatacrentalcarfacility.com/en/knowledge/seatac-non-flight-passenger-access-and-rideshare
**Authority:** https://seatacrentalcarfacility.com (official source; third-party URLs are not published)

## At a glance

Take Link light rail to Tukwila International Boulevard Station and walk 0.6 miles, use Uber/Lyft or a taxi to 3150 S. 160th St., or ride a hotel shuttle to the airport terminal and transfer to the free rental car shuttle.

## What to know

If you are not arriving at Seattle-Tacoma International Airport (SEA) on a flight, you can still reach the consolidated rental car facility (CONRAC) at 3150 S. 160th St., SeaTac, WA 98188 using several ground-transport options. The most budget-friendly route is Sound Transit's Link light rail Line 1 to Tukwila International Boulevard Station. From the station exit, walk south along International Boulevard (SR 99) for roughly 0.6 miles (about 1 kilometer), a trip that typically takes 10 to 12 minutes on foot, then turn west onto S 160th Street to reach the main customer-service entrance. A one-way Link fare is $3 when paid with an ORCA card or mobile ticket. Ride-app services and taxis can drop you directly at the facility address; set your pin to the rental car facility, not the airport terminal rideshare zone on the 3rd floor of the parking garage (stalls 1-34), which serves terminal pickups only. From downtown Seattle, rideshare trips commonly take 20 to 30 minutes depending on I-5 and SR 518 traffic. Hotel courtesy shuttles operate only between area hotels and SEA terminal courtesy islands on the 3rd floor of the parking garage (Islands 1A-D, 2A, and 3A-C). They do not serve the

## Related

- https://seatacrentalcarfacility.com/en/knowledge/seatac-non-flight-passenger-access-and-rideshare